Where is the most suitable installation location for co smoke detector?

Classification: NEWS Author: SUMRING Time: October 22, 2023

At first, we should know that the co smoke detector should not be installed in the following places:

1. Places where smoke is trapped under normal circumstances 2.Places with relative humidity greater than 95%

3.A place with large dust, water mist and oil mist pollution

4.Places with high wind speed (greater than 5 m / s)

Insert the battery into the battery compartment correctly according to the indicated positive and negative polarities.

Select a suitable location, generally install the co smoke detector on the ceiling in the center of the detection space, and fix the co smoke detector base to the selected installation location with mounting screws.

co smoke

But you should know that smoke detector protection area: When the space height is 6 meters to 12 meters, the protection area of a detector is 80 square meters for the general protection site; When the space height is below 6 meters, the protected area is 60 square meters Usually the detector should be installed in the bedroom, living area, car and other places where people stay for a long time. It is recommended to install the detector in the bedroom, corridor, basement, car and living area.

Because the gas concentration and smoke concentration of carbon monoxide are lighter than air, the co smoke detector should be installed 0.3-1 meters below the ceiling.

When installing the co smoke detector, it is not easy to be too close to the stove, so as not to be baked by the flame; the co smoke detector cannot be installed in places where the water vapor flow is large, such as exhaust fans, doors and windows, and bathrooms; In order to prevent oil fume from blocking the air inlet of the detector, it will not allow smooth entry, which will affect the sensitivity of the co smoke detector.

Let's Discuss Your Project

1. What is fire detection and protection system?

That is fire detection systems. A fire detection alarm system (FDAS) is an alarm system that receives data on assesses and then responds to events reported by various fire detectors. Speaking of fire detectors such as smoke detector heat detector siren alam fire alarm bell etc. sometimes natural gas detector also included

2. Do fire detectors detect carbon monoxide?

Yes fire detectors can detect carbon monoxide. We have both fire detector and CO alrm also offer smoke and carbon monoxide composite detectors. Both of these fire detector and CO alarm can save lives even although detector do so in different ways. fire detectors alert you to the presence of smoke and possibly fire in your home. Carbon monoxide detectors warn you to dangerous levels of carbon monoxide gas

3. What are the advantages of your photoelectric smoke detector of fire detectors ?

All of our photoelectric smoke detectors use the new ABS+PC material and the PCB pass the 24-hour aging test according to strict production processes. These fire detectors are independent networked(wired). We all have what you need.